Step-by-Step Guide- How to Boot Your Lenovo Laptop into Safe Mode for Troubleshooting
How to Start a Lenovo Laptop in Safe Mode
Starting a Lenovo laptop in Safe Mode can be a lifesaver when you encounter issues with your system. Safe Mode is a diagnostic mode that allows you to troubleshoot and fix problems with your laptop. In this article, we will guide you through the steps to start your Lenovo laptop in Safe Mode.
Step 1: Power on your Lenovo laptop
To begin, turn on your Lenovo laptop as you normally would. Press the power button until the laptop starts up.
Step 2: Access the BIOS setup
As the laptop boots up, you need to access the BIOS setup. The key to enter the BIOS setup may vary depending on your laptop model. Common keys are F1, F2, F10, or Del. Look for a prompt on the screen that tells you which key to press.
Step 3: Navigate to the Boot menu
Once you are in the BIOS setup, navigate to the Boot menu. This can usually be found under the “Advanced” or “Boot” tab. Use the arrow keys on your keyboard to select the Boot menu.
Step 4: Modify the boot order
In the Boot menu, you will see a list of boot devices. Use the arrow keys to select your hard drive and press the “+” or “-” key to move it up or down in the boot order. Ensure that your hard drive is at the top of the list.
Step 5: Enable Safe Mode
Now, look for an option called “Safe Mode” or “Safe Boot” in the Boot menu. Select it and press Enter. This will enable Safe Mode on your laptop.
Step 6: Exit the BIOS setup
After enabling Safe Mode, exit the BIOS setup. Save any changes you made and restart your laptop.
Step 7: Start in Safe Mode
Your Lenovo laptop will now restart and boot into Safe Mode. You will notice that the screen displays “Safe Mode” or “Safe Mode with Networking” at the bottom right corner. This indicates that your laptop is now running in Safe Mode.
Conclusion
Starting your Lenovo laptop in Safe Mode can help you identify and fix problems with your system. By following the steps outlined in this article, you can easily enter Safe Mode and troubleshoot any issues you may be facing. Remember to exit Safe Mode once you have resolved the problem to return to your normal operating system.
