Step-by-Step Guide to Replace the Rear View Mirror on a 2015 Ford Fusion

How to Replace Rear View Mirror on 2015 Fusion

Replacing the rear view mirror on a 2015 Ford Fusion is a task that can be easily accomplished with the right tools and a bit of patience. Whether your mirror has been damaged or simply needs a refresh, this guide will walk you through the process step by step.

Tools Needed:

Before you begin, gather the following tools:
– Screwdriver set (flathead and Phillips)
– Mirror replacement (ensure it matches your vehicle’s specifications)
– Mirror mounting bracket (if necessary)
– Safety glasses

Step 1: Park Your Vehicle and Gather Materials

Park your 2015 Ford Fusion on a flat, even surface. Gather all the necessary tools and the replacement rear view mirror. Make sure you have a clear workspace to work on.

Step 2: Remove the Rear View Mirror

1. Open the driver’s door and locate the rear view mirror assembly.
2. Loosen the mounting screws using a flathead screwdriver. There are typically two screws holding the mirror in place.
3. Gently pull the mirror assembly away from the door, ensuring it is disconnected from the electrical connections.

Step 3: Disconnect the Electrical Connections

1. With the mirror assembly removed, locate the electrical connector on the back of the mirror.
2. Carefully press the release tab on the connector and pull it out to disconnect the electrical connections.

Step 4: Remove the Old Mirror

1. Remove the mounting bracket from the old mirror, if necessary. This may require additional screws or clips.
2. Slide the old mirror off the mounting bracket and set it aside.

Step 5: Install the New Mirror

1. Place the new mirror on the mounting bracket, ensuring it is aligned correctly.
2. Secure the mounting bracket to the new mirror using the appropriate screws or clips.
3. Attach the mounting bracket to the door with the included screws.

Step 6: Reconnect the Electrical Connections

1. Insert the electrical connector into the new mirror’s back.
2. Make sure the connector is securely connected and the release tab is engaged.

Step 7: Test the New Mirror

1. Gently push the mirror assembly back into place on the door.
2. Reattach the mounting screws using a flathead screwdriver.
3. Test the new mirror to ensure it is functioning properly and securely mounted.

Congratulations! You have successfully replaced the rear view mirror on your 2015 Ford Fusion. Remember to dispose of the old mirror properly and keep your new mirror clean for optimal visibility.